收藏本站
■ Solder Mounting
Perform solder mounting under the following recommended conditions
to prevent the temperature of the relays from rising, causing possible
damage to the relays.
Flow Soldering
Through Hole Packages (Once only)
SSOP Handling Precautions
Humidity-resistant Packaging
Component cases can crack if surface-mounted components that
have absorbed moisture are subjected to thermal stress when
mounting. To prevent this, observe the following precautions.
1. Unopened components can be stored in the packaging at
5 to 30 ° C and a humidity of 90% max. However, they should
Solder type Preheating
Temperature
Lead solder 150 ° C,
(SnPb) 60 to 120s
Lead-free solder 150 ° C,
(SnAgCu) 60 to 120s
Solder
Temperature
260 ° C,
10s max.
260 ° C,
10s max.
be used within 12 months.
2. After the packaging has been opened, components can be
stored at 5 to 30 ° C and a humidity of 70% max. However, they
should be mounted within 168 hours.
3. If, after opening the packaging, the humidity indicator turns
pink to the 30% mark or the expiration date is exceeded, then
bake the components while they are still on the taping reel
Note: It is recommended that the suitability of solder mounting be
verified under actual conditions
Reflow Soldering
Surface Mount Packages (Twice max.)
and use them within 72 hours. Do not bake the same compo-
nents more than once.
Baking conditions: 60 ± 5 ° C, 64 to 72 hours
4. If the same components are baked repeatedly, then the tape
detachment strength will change, causing potential problems
when mounting. Use caution when mounting under these
conditions.
5. When mounting using dehumidifying measures, always take
Solder type
Preheating
Temperature*
Soldering
Temperature*
countermeasures against component damage from static
electricity.
Lead solder 140 to 160 ° C,
(SnPb) 60 to 120s
Lead-free solder 180 to 190 ° C,
(SnAgCu) 60 to 120s
210 ° C,
30s max.
230 ° C,
30 to 50s
Peak,
240 ° C max.
Peak,
260 ° C max.
6. Do not throw or drop the components. If the laminated pack-
aging material is damaged, airtightness will be lost.
7. Tape cut SSOP’s are packaged without humidity resistance.
Use manual soldering to mount them.
*Measured from the top surface of the relay package
Note: 1. It is recommended that the suitability of solder mounting be
verified under actual conditions
2. Tape cut SSOP’s are packaged without humidity resistance.
Use manual soldering to mount them.
Manual Soldering (Once only)
Manually solder at 350 ° C for 3s or less or at 260 ° C for 10s or less.
4
MOS FET Relays
Technical Information
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
G3VM-21LR11-TR05 RELAY SSR SPST-NO 0.9A 4SSOP SMD
G3VM-351DY RELAY SSR SPST-NO 350V 100MA SMD
G3VM-351D RELAY SSR SPST 350V 120MA 4SMT
G3VM-351E RELAY SSR SPST 350V 120MA 6SMT
G3VM-351G RELAY SSR SPST 350V 110MA 4SOP
G3VM-351H RELAY SSR SPST 350V 110MA 6SOP
G3VM-352F RELAY SSR DPST 350V 120MA 8SMT
G3VM-352J RELAY SSR DPST 350V 110MA 8SOP
相关代理商/技术参数
G3VM-21LR10(TR) 功能描述:固态继电器-PCB安装 20V, SPST-NO, SSOP4 SMT 200mA 3ohm .8pF RoHS:否 制造商:Omron Electronics 控制电压范围: 负载电压额定值:40 V 负载电流额定值:120 mA 触点形式:1 Form A (SPST-NO) 输出设备:MOSFET 封装 / 箱体:USOP-4 安装风格:SMD/SMT
G3VM-21LR10(TR05) 制造商:Omron Electronic Components LLC 功能描述:Relay SSR 30mA 1.45V DC-IN 0.2A 20V AC/DC-OUT 4-Pin SSOP T/R 制造商:Omron Electronic Components LLC 功能描述:RELAY SSR SPST-NO 4-SSOP SMD 制造商:Omron Electronic Components LLC 功能描述:SSR MOSFET 20V 200mA 制造商:Omron Electronic Components LLC 功能描述:SSR, MOSFET, 20V, 200mA; Load Voltage Max:20VAC; Load Current:450mA; On State Resistance Max:1.2ohm; Contact Configuration:SPST-NO; Isolation Voltage:1.5kV; Forward Current If:30mA; Relay Terminals:SMD; Load Current RMS Max:200mA ;RoHS Compliant: Yes
G3VM21LR10SAMPLE 制造商:Omron Corporation 功能描述:SSOP MOS FET Relay
G3VM21LR10TR 制造商:Omron Electronic Components LLC 功能描述:MOSFET SSOP TAPE & REEL RELAY - Tape and Reel
G3VM-21LR10TR 制造商:OMRON 制造商全称:Omron Electronics LLC 功能描述:MOS FET RELAYS
G3VM21LR10TR05 制造商:Omron Electronic Components LLC 功能描述:Relay SSR 30mA 1.45V DC-IN 0.2A 20V AC/DC-OUT 4-Pin SSOP T/R 制造商:Omron Electronic Components LLC 功能描述:RELAY, SSR, MOS FET,SSOP,4 PIN,0-20V0-200MA - Tape and Reel 制造商:Omron Electronic Components LLC 功能描述:RELAY SSR SPST-NO 4-SSOP SMD
G3VM-21LR10TR05 制造商:OMRON 制造商全称:Omron Electronics LLC 功能描述:MOS FET RELAYS
G3VM21LR11 制造商:Omron Electronic Components LLC 功能描述:MOSFET SSOP RELAY - Bulk 制造商:Omron Electronic Components LLC 功能描述:RELAY SSR SPST .9A 4-SSOP